How to install stainless steel squatting toilet in rural areas ?
The stainless steel squatting pan has the characteristics of environmental protection, durability and easy installation. Below KUGE will introduce to you how to install the stainless steel squatting toilet.
First, clean up the gravel and dirt on the ground. Keep the ground level. Then measure the size of the stainless steel squatting pan. According to the size of the squatting pan, dig a hole.
When installing a stainless steel squatting toilet, you should first reserve the sewer pipe at an appropriate position from the wall according to the sewage outlet of the installed toilet, and at the same time determine the distance between the entrance of the sewer pipe and the ground level.
When installing the squatting pan, it is required to reserve a pit for installation under the ground. Remember that the depth of the pit should be greater than the height of the squatting pan for easy installation.
Put the connecting rubber plug into the water inlet hole of the squatting pan and lock it tightly. Apply a layer of glass glue or putty on the outer edge that is in contact with the water inlet hole of the squatting pan, and insert the water inlet pipe into the water inlet hole of the rubber plug to make it well sealed with the rubber plug to prevent water leakage.
More sanitary wares problems and information , pls follow KUGE.
